Organizing

We handle tools for cleaning, drying, restoring, measuring, weighing, and rubbing of artifacts

Organizing

磁界結式厚さ計 Water separation
Claytex SN sheets
Measuring thickness for complex shapes.
Magnetic coupling thickness meter

Magnetic coupling thickness meter

■Magnetic coupling thickness meter
For measuring thicknesses for complex shapes that are unable to be measured with calipers or vernier calipers.
2 point censor measuring and specialized edge enables a multi-angle measurement.
Name of item Dimension (mm) Measuring range Power Weight(g) Unit of sales
TMV0210 180 x 180 x 70 0~10mm AC100V 50/60Hz (power consumption : 2VA) 700 1
*Measuring range 0-30 also available.
Effectively measuring full artifact
Vision drafting system (VD-Ⅰ)

Vision drafting system (VD-Ⅰ)

■Vision drafting system (VD-Ⅰ)
By setting up large artifacts onto the movable measuring table, the zoom function will enable detailed measurements.
In-detailed drawings can be done with the same drawing style as usual.
Name of item Maximum measurements (cm / Width x Depth) Unit of sales
VD-Ⅰ 60 x 45 1
Package includes: Main body part
Rotating table for artifacts
Liquid screen monitor
Dedicated table
Vision drafting system (VD-Ⅱ)

Vision drafting system (VD-Ⅱ)

■Vision drafting system (VD-Ⅱ)
Controls the lighting and magnification with just one touch, enabling speedy measurements for flat or small artifacts.
A compact, light weight and space-saving design, easy to set up.
Name of item Maximum measurements (cm / Width x Depth) Unit of sales
VD-Ⅱ 30 x 50 1
Package includes: Main body part
Liquid screen monitor
Dedicated table
■Options
Name of item Unit of sales
Implements 1
Measuring the diameter/radius of artifact
Curve ruler board

■Curve ruler board
Concentric circles drawn under the surface protection sheet enable accurate measurements of the diameter and radius.
Name of item Dimension (mm) Material Unit of sales
R-01 420 x 420 Surface protection: Soft vinyl / Main body part: Acrylic 1

Measure artifact by rotating
Rotating table for measuring

■Rotating table for measuring
A rotation table with 5 mm intervals of concentric circles printed for measuring.
The concentric circles can rotate, which makes it unnecessary to reverse heavy weight artifacts when measuring or observing.
Name of item Dimension(φ) Unit of sales
TG-Large 400 1
TG-Middle 300 1
TG-Small 200 1

Ink rubbing

Ink rubbing set

■Ink rubbing set
Name of item Unit of sales
Rubbing set 1 set
Drawing paper (70 x 138cm 100 sheets) 1 box
Rubbing ink (250g/Black) 1
Brush (Large) 2 Shaver
Wads (Large) 2
Wads (Small) 2
Additional liquid(60g) 1
Cloth (92 x 200cm) 1 sheet
Rubbing set Package includes: Rubbing ink (250g/Black) 1
Additional liquid (60g) 1
Wads (Large)(Small) 2 each
Cotton (includes 100g) 1
Brush (Large) 2 Shaver
Cloth (92 x 100cm) 1 blades
Drawing paper 100 sheet

Shooting (or photograph)

Long shot imaging table

■Long shot imaging table
A bird’s eye view of the imaging table made from acrylic. Lightweight and compact in size. A flexible design, where parts can be adjusted to suit usage, easy to carry and store.
Name of item Dimension (mm) Unit of sales
Basic artifact bird’s eye view photographing stand Outer dimension:520 x 850 x 462 1
Package includes: Main frame 1
Milky-white acrylic board 1 sheet
Lighting set (Fluorescent lights) 4 Shaver

Options upon additional purchases

■Options upon additional purchases
Name of item Dimension (mm) Unit of sales
Milky-white acrylic board 675 x 495 1
Frame with scales 675 x 495 (300 scales) 1
Transparent acrylic board 675 x 495 1
Fluorescent light protection case Length:580 Diameter:28φ 1

Measuring
Caliper with scales
Caliper with scales

■Caliper with scales
(for both inside and outside measurements)
Name of item Maximum measuring size(mm) A(mm) B(mm) C(mm) board thickness(mm) Unit of sales
No.100 100 152 100 98 1.5 1
No.130 130 196 130 125 1
No.150 150 225 150 143 1
No.200 200 300 200 190 2.0 1
No.250 250 367 250 210 2.5 1
No.300 300 450 300 268 1
No.350 350 500 350 272 1
No.400 400 600 400 360 1
No.500 500 900 600 545 3.0 1
*Measurement errors only within ±0.5mm

Sorting the artifacts

Flotation of the artifacts
Water separation

■Water separation
Washes away the dirt and three kinds of carbohydrate mesh nets pick out the small substances
Name of item Dimension (mm) Material Unit of sales
Water separation 520φ x H840 Main body part:Polyethylene
Basket : Stainless steel
Stand : Iron
1
*Package includes: Main body part
Mesh basket(5mm/2.5mm/1mm)

Dedicated settling tank

■Dedicated settling tank (3 layers)
The dirty water coming out from the water separation device will be filtered in 3 layers, leaving only clean water. Extremely small artifacts that the water separation could not filter out can also be filtered out by using tea strainers.
Name of item Capacity(L) Material Unit of sales
Dedicated settling tank (3 layers) 140 Foam molded polypropylene 1

Drying the artifacts

Drying rack
Drying rack set

■Drying rack set
Safely and efficiently dries the artifacts without unnecessarily using up extra space. Easy to move with rollers.
Name of item Dimension (mm) Material Unit of sales
Drying rack set 790 x 620 x 1260 Stainless steel / Aluminum 1
*Package includes: Main body part
Drying basket (shallow type) 32
Water receiver 2

Compensating and restoring the artifacts

Filling material
Claytex

Claytex

■Claytex
Filling material that can alternate plaster. The first stage hardening is faster than plaster, enabling an easier molding. Molding can be done just by adding water. The color is gray, convenient for Sue ware restoration. Compared to plaster, there is less liquid dripping, enabling restoration with less material. The duration for the first stage hardening is only 10 to 20 minutes. Acrylic paint can be used after the filling dries. Less contraction of the material allows better adhering, and the dried claytex will not fall off. Prevents cracking from aging.
Name of item Unit of sales
Claytex(10kg) 1 case (10 bags of 1kg content)

Claytex

Mix the filling
Rubber bowl

■Rubber bowl
Name of item Dimension (mm/Thickness/Diameter/Height) Unit of sales
J 3 x 150 x 155 1
L 5 x 130 x 95 1
M 3 x 100 x 70 1

Pallet knife

■Pallet knife
Name of item Dimension (mm) Unit of sales
Pallet knife P-1 178 1

Core material for filling
SN sheets

SN sheets

■SN sheets
A special net-structured sheet that blends into plaster easily.
Reinforces the filling neatly
Flexible and can be easily adjusted to the desired shape.
Readjustment of shape possible by re-heating.
Name of item Dimension (mm)/Width x Length x Thickness Material Unit of sales
Individually cut sheets (includes 10 sheets) 150 x   900 x 1 The fiber is made from fiber glass PP with Polyurethane resin. 1
Roll type #2 (includes 4 rolls) 50 x 1800 x 1 1
Roll type #3 (includes 4 rolls) 75 x 1800 x 1 1
Roll type #4 (includes 4 rolls) 100 x 1800 x 1 1
Roll type #6 (includes 4 rolls) 150 x 1800 x 1 1

SN sheets

Lining for reinforcement material
HM sheet

HM sheet

■HM sheet
A special sheet best suited for back-lining of filling material.
Can be shaped freely.
The surface of the sheet is smooth, keeping it clean from the filling material, for efficient and fast operations.
Reusable and cost efficient.
Name of item Dimension(mm)/Width x Length x Thickness Material Unit of sales
HM sheet 600 x 3000 x 1 Polymer trans-polyisoprene 1 Roll

HM sheet

Turning the artifact.
Potter's wheel for restoration

■Potter’s wheel for restoration
The table has concentric circles for measurements, and the table can rotate without putting weight on the artifact.
Name of item Dimension Unit of sales
TR-Large 400φ 1
TR-Middle 300φ 1
TR-Small 200φ 1

Shaping the filling material
Shaver set

■Shaver set
Best suited for rough sculpting of R areas.
Shaver blades can be replaced.
Name of item Unit of sales
Shaver set 1 set
Shaver set (with blades) 1 Shaver
Spare blades 12 blades
Shaver set Package includes: Shaver set (with blades) 3 Shaver
Spare blades 12 blades

Grinding the filling material
Handle set
Handle set spare blades image

■Handle set
Best suited for in-detailed sculpting.
Insert blade into handle part to use.
Name of item Unit of sales
Handle set 1 set
Handle (With spare blade no.19) 1 Shaver
Draw-cutting blades W 1 blades
Draw-cutting blades X 2 blades
Draw-cutting blades Y 1 blades
Chisel blades 5 blades
Spare blades No.19 5 blades
Carving blade A 2 blades
Carving blade C 2 blades
Carving blade D 2 blades
Carving blade E 2 blades
Carving blade F 2 blades
Handle set Package includes: Handle 5 Shaver
Draw-cutting blades(W・Y) 5 blades each
Draw-cutting blades(X) 4 blades
Chisel blades 5 blades
Spare blades No.19 5 blades